4Pcs 3000mAh 103665 3.7V 1S 3C Lipo Battery for Arduino Nodemcu ESP32 Board

Description: 3000mAh: The recommended charging current is 0.6A, the maximum does not exceed 3A. The discharge current is recommended 1.5A, and the maximum does not exceed 3A Over-discharge protection: When the battery is about to run out and the voltage is as low as 3.0V, the protection board will also be turned off and can no longer be discharged, forming an over-discharge protection effect Overcharge protection: When charging the battery, when the voltage reaches the highest battery voltage (4.2V), the protection board will automatically power off and shut down, indicating that it will not continue to charge when fully charged. form an overshoot protection4Pcs 3000mAh 103665 3.7V 1S 3C Lipo Battery for Arduino Nodemcu ESP32 BoardMakerFocus 4pcs 3.7V 3000mAh Lithium Rechargeable Battery 1S 1C Lipo Battery with Protection Board Insulated Rubber Tape and Micro JST 1.25 Plug for Ar duino NodeMCU ESP32 Development Board About this item Note: The battery overcurrent protection is not a panacea, do not continue to charge and discharge the current and voltage with a large current beyond the range, otherwise the protection board will be damaged and invalid 3000mAh: The recommended charging current is 0.6A, the maximum does not exceed 3A. The discharge current is recommended 1.5A, and the maximum does not exceed 3A Over-discharge protection: When the battery is about to run out and the voltage is as low as 3.0V, the protection board will also be turned off and can no longer be discharged, forming an over-discharge protection effect Overcharge protection: When charging the battery, when the voltage reaches the highest battery voltage (4.2V), the protection board will automatically power off and shut down, indicating that it will not continue to charge when fully charged. form an overshoot protection Short circuit protection: When an accidental short circuit occurs, the protection board will automatically shut down within a few milliseconds and will not be powered on again. Note that the cell is short-circuited (not through the protection board). The protection board will also fail due to continuous high current, or the components are heated and damaged Product Description Note: 1. The maximum operating current of this battery is only about 1.5A, can not be used for unmanned aerial vehicles, model aircraft or power tools and other products that require high current 2. Connector is Micro JST 1.25 plug, it can be used for ESP32 Ar duino development board whose plug is 1.25mm Specification: Standard Voltage: 3.7V Capacity: 3000mAh Approx Weight : 35g Dimensions(±2mm): 50 * 34 * 10 mm /1.96 * 1.33 * 0.39inch(L*W*H) Discharge Rate: 1C Working Current: 1.5A The maximum discharging current: 3C Overcurrent Protection: 1.8-2.1A Type of Connector: Micro JST 1.25 PaymentDelivery detailsTerms of salesAbout usContact usPayment - All payments must be prepaid. - Accept payment by Credit Card 、Debit Card、Apple Pay、Google Pay and PayPal. - Payment must be received within 7 days after auctions ended. Unpaid dispute will be filed to eBay for the non payable bidders.Delivery details - We will ship all orders within 2 business day of payment. - The shipment usually takes 1-5 business days (Saturday and Sunday excluded). - If you need the item urgently, please contact us for detail before purchase. - Local pick up is not available.Terms of sales 1.Our items come with our warranty. 2.Our warranty does not extended to any products that are physically damaged or that are not under normal operating conditions as a result of misuse or improper installation on the buyer/user's part. 3.This product comes with 60-Day Money Back Guarantee. 4.We stand behind every product we sell. If you're not pleased with your purchase, we'll be happy to make an exchange or refund. 5.For all returned products, please contact us for the returning address.About us Welcome to our store ! We supply many products including unmanned drone and accessories, camera & camcorder accessories and Consumer Electronics.High product quality, reasonable prices, excellent customer service and a reliable credit standing is our tenet. Thank you for shopping at our eBay Store.Contact us1.You will receive our positive feedback as soon as you pay for your item. 2. Your better comments will be an encouragement for us to offer the better quality and the better service in future. 3.If you are not satisfied with them, please contact us first via Ask a Question or via Contact Seller. Your messages will be answered within 1-2 business day. We shall try our best to solve your problem to your satisfaction.

Price: 24.82 USD

Location: Los Angeles, California

End Time: 2024-11-17T16:24:39.000Z

Shipping Cost: 0 USD

Product Images

4Pcs 3000mAh 103665 3.7V 1S 3C Lipo Battery for Arduino Nodemcu ESP32 Board

Item Specifics

Restocking Fee: No

Return shipping will be paid by: Seller

All returns accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money back or replacement (buyer's choice)

Brand: MakerFocus

MPN: Does Not Apply

Compatible Scale: 1:4, 1:5, 1:6, 1:8, 1:10, 1:12, 1:14, 1:15, 1:16, 1:18, 1:20, 1:26, 1:24, 1:27, 1:28, 1:32, 1:36, 1:48, 1:50, 1:64, 1:87, 1:75, 1:96, 1:100, 1:150, 1:275, 1:325, 1:1250, 1:2000

Compatible Vehicle Type: Buggy, Crawler, Drift Car

Compatible Brand: Universal

Compatible Fuel Type: Electric