Anthem MRX 1140 8k | 11.2-Ch AVR

Description: Anthem MRX 1140 8k - used in home theater about a year. Pre-out were only used to send signals to amps. Upgrading to AVM 90 Anthem's flagship receiver is an A/V masterpiece Anthem's top-of-the-line receiver just got an 8K upgrade — all 10 HDMI connections (7 in and 3 out) support 8K at 60Hz and 4K at 120Hz. The MRX 1140 8K doesn't skimp on audio quality either — it offers exceptional signal processing, amplification, and room correction, along with an advanced digital to audio converter. It also has a fantastic web-based control system, allowing you to set up and control your system from your computer or smart device. Please note: This advanced home theater receiver requires running Anthem's acclaimed ARC Genesis calibration system on your Mac® or Windows® laptop during setup, using the included microphone and stand. It's not the simplest process we've seen, but it does a wonderful job of tuning the sound to your specific room. (See our video in the image carousel above.) Enjoy theater-quality Atmos surround sound at home The MRX 1140 8K is capable of driving up to 11 speakers at the same time. That means you can power an ultra-immersive 7.2.4-channel Dolby Atmos or DTS:X™ system, with up to four upward-firing or in-ceiling speakers for overhead effects. Plenty of power for each channel Five of the receiver's channels feature a Class AB design and are rated at 140 watts per channel with two channels driven. They're well-suited for high-performance stand-mount or floor-standing speakers. The other six channels use Class D amplification and are rated at 60 watts per channel with two channels driven. That's plenty of power for surround and overhead channels that reproduce less-demanding portions of a movie's soundtrack. A high-quality toroidal power supply helps ensure top-notch sound from each channel. High resolution video and audio quality The MRX1140 8K's HDMI 2.1 connections allow 8K video passthrough or 4K at an ultra-smooth 120Hz refresh rate. These connections also support HDR (High Dynamic Range) formats like Dolby Vision, so you'll be able to maintain premium picture quality from your UHD Blu-ray player or next-gen game console through to your TV. With eARC (enhanced Audio Return Channel), it can also receive uncompressed audio signals — including Dolby Atmos — from your eARC-equipped TV. Music will sound exceptional, as well, thanks to the audiophile-grade 32-bit/768kHz DAC. ARC Genesis software screens ARC Genesis room correction software runs on your PC or Mac®. Intuitive web-based controls One of the features that makes Anthem's receivers stand out from the crowd is their user-friendly control interface. Access it from a web browser or download the new Anthem Remote app (currently available as a public beta). You can adjust settings, select inputs, toggle Anthem Room Correction, and more. Advanced room calibration with ARC Genesis The MRX 1140 8K includes the company's own highly regarded ARC (Anthem Room Correction) Genesis software — one of the industry's best room-correction platforms. ARC Genesis measures the acoustics of your room with the included microphone, and then fine-tunes the output of your system to match the unique sonic characteristics of your space. The resulting sound is clear, smooth, and ultra-detailed, with tight bass and high-impact dynamics. Note: You'll need to install the free ARC Genesis software on your Mac® or PC prior to calibration. READ LESS Product highlights: Power and processing: 11-channel amplifier channels 1-5 rated at 140 watts per channel into 8 ohms (20-20,000 Hz) at 1% THD, with 2 channels driven Class AB amplifier design channels 6-11 rated at 60 watts per channel into 8 ohms (20-20,000 Hz) at 1% THD, with 2 channels driven Class D amplifier design Dolby® and DTS® surround sound decoding Dolby Atmos® and DTS:X processing for use with in-ceiling or "height" speakers for more enveloping home theater sound DTS® Virtual:X™ creates three-dimensional effects without height speakers IMAX® Enhanced reproduces the full dynamic range of specially encoded IMAX soundtracks from compatible sources ARC Genesis speaker calibration system helps fine-tune your system to best match your room's acoustics requires installation of free ARC Genesis software on a Mac or PC prior to calibration audiophile-grade 32-bit/768kHz DAC (digital to analog converter) toroidal power supply ensures low-noise, high-performance picture and sound large front-panel display gives you easy-to-read status updates at a glance Digital and streaming music options: built-in Bluetooth for wireless music listening with smartphones, tablets, and compatible computers built-in Wi-Fi for listening to music from a networked PC, free internet radio, and music services free future firmware update will include support for Spotify® and Roon Apple AirPlay 2 lets you stream directly from an iPhone® or iPad® and ask Siri to play Apple Music® Google Chromecast for wireless music streaming from compatible devices Multi-room audio/video: dual-room/dual-source output amp assign function lets you use the surround back speaker outputs in different configurations (bi-amp the front speakers or power Zone 2) using powered 2nd-room output allows 9.2-channel sound in main room Zone 2 stereo preamp outputs for use with an optional external amplifier Zone 2 HDMI output HDMI features: HDMI 2.1 audio/video switching: 7 in, 3 out all HDMI connections support 4K/120Hz and 8K/60Hz HDCP 2.3 technology ensures compatibility with Ultra HD sources and TVs HDR-compatible for extended picture contrast and brightness with compatible TVs and HDR-encoded content supports HDR10, HDR10+, Dolby Vision®, and HLG (Hybrid Log Gamma) supports Variable Refresh Rate (VRR) and Auto Low Latency Mode (ALLM) supports ARC (Audio Return Channel) and eARC (Enhanced Audio Return Channel) eARC receives uncompressed surround sound signals including Dolby Atmos and DTS:X via the HDMI connection with your compatible TV Other connections: digital audio inputs: 3 Toslink optical, 2 coaxial 5 analog stereo RCA audio inputs 15.2-channel RCA preamp outputs includes 2 discrete subwoofer outputs that can be calibrated independently outputs for 11 speakers (Front L/R, Center, Surround L/R, Surround Back L/R, Height1 L/R, Height2 L/R) full-sized front-panel headphone jack Warranty and other info: intuitive browser-based control interface easily turn zones on and off, adjust settings, switch up speaker configurations, and more supports smartphones, tablets, and computer browsers free Anthem Remote app lets you use your phone as a Wi-Fi remote (currently available as public beta) support for IP-based third-party remote control systems 17"W x 6"H x 14-1/2"D weight: 33.6 lbs.

Price: 3000 USD

Location: Aubrey, Texas

End Time: 2024-12-17T14:50:03.000Z

Shipping Cost: 50 USD