Apollo AP700 Alphanumeric Pager - Nurse/Hospital

Description: Apollo AP700 Alphanumeric Pager The Brand New Apollo Gold+ AP700 2024 edition replaces the AL-A25 and the AL-924 pager models with a new, improved TFT display that is brighter and sharper than the LCD displays used on previous models. The new pager model is slightly smaller than the AL-A25 (929 Gold) but provides improved readability. The 2024 edition has a revised display that replaced the prior edition that blanked out in some locations. These pagers are used in assisted living facilities, nursing homes, offices, restaurants and work in conjunction with a paging transmitter (not included).Be sure your paging system uses a frequency between 450 and 470 MHz. You will be able to easily program the pager to the exact frequency within the selected frequency range. DirectPage has over 100 of these very popular and sometimes difficult to obtain pagers in stock. Orders are shipped from our offices on the east coast or directly from Apollo on the West Coast (for larger orders). Brand new pagers in the original gift box with user guide, chain, holster and battery. Hand-programmable for frequency, bandwidth, baud rate and up to 8 capcodes. Printable hand-programming instructions are shown below. Please contact us with any questions about features or programming. Volume discounts available for purchases of 10 or more pagers purchased together. We will match or beat most competitor offers. Pager Features:Up to 8 capcodes 4 Keys Operation, User Friendly Interface4 Lines, Total 84 Alphanumeric One Page DisplayLarge Memory Size; Total Capacity 28,672 Letters for POCSAG16 Memory Slots, 10 Sets Full Message4 Beep Alerts, 10 Melody Alerts, Vibration Sleep Mode5 Daily alarm SetsLarge, high definition TFT alphanumeric display12 month factory warranty from date of purchase.Easily hand-programmed for frequency, bandwidth, baud rate and capcodes.Hand-Programming Instructions:1) Hold the center button while inserting the battery until "Password: 0000" is displayed, then release the button.2) Insure that "0000" is displayed as the password and press the right button.3) The next screen will be the frequency and one of the digits will be flashing, this is the cursor. Use the left/right buttons to move the cursor, use the center button to increase the value of the digit. You can also set the bandwidth to wide or narrow on this screen.4) Once the frequency is set correctly press the right button to continue.5) The next screen is the first capcode. Follow the instructions in step 3 to set the capcode, then press the right button to continue. Enter additional capcodes and turn them 'On' as needed.6) After the 8th capcode screen you will see the baud rate screen. Press the center button to select the baud rate that is used by your system transmitter, then press the right button to continue.7) The next screen allows you to change the password if desired.8) The next screen allows you to adjust the display contrast. Press the right button to complete and exit the programming mode. 9) PASS appears on the screen to indicate programming completion.

Price: 149.95 USD

Location: Vineland, New Jersey

End Time: 2024-07-29T16:38:55.000Z

Shipping Cost: N/A USD