Evotech Evo Short Clutch and Brake Lever set - MV Agusta Brutale 1000 RR (2024+)

Description: Evotech Evo Short Clutch and Brake Lever set - MV Agusta Brutale 1000 RR (2024+) Features of EP Evo Short Clutch & Brake Lever Set Designed by Evotech Performance using state of the art design software – and riding experience Anatomically correct deep radiused edges along each lever length for comfort, feel and style EP EVO lever blades are shorter than the OE equivalents and commonly referred to as “two-finger levers” Usable lever width is 55mm approx. to easily accommodate two gloved fingers The “short-length” style reduces the chances of contact with a solid object and breaking Safeguard “snap point” positioned at lever ball end Six-position adjustment span to suit varying finger lengths on both levers via an anodised adjuster Lever adjustment position shown via machined indents 17mm typical (+/- 1mm) lever span adjustment range (measured at lever midpoint) Lever blade and bracket mount union machined from billet aluminium Stainless steel CNC-machined clevis pins and retaining clips and, where supplied, piston adjustment screw/barrel and tension retaining spring Scalloped machining on lever rear reduces weight while retaining strength CNC-machined bracket mount unions ensure a precise and fuss-free install of OE components Lever ball-end dimensions meet statutory requirements Durable black anodise finish on lever blades and bracket mount unions Red durable anodise finish on span adjusters Alternative colour (green, silver, blue, black, gold, orange, titanium) span adjusters available from our EP Accessories section Levers and bracket mount unions feature Evotech Performance brand logos Video fitting instructions available for download Will these fit my bike and can I fit them myself? Every EP Evo Short Clutch & Brake Lever Set is manufactured for a specific model i.e. they are not universal due to each make/model having different mountings, clutch cut-out and brake light switches etc. EP Evo Short Clutch & Brake Lever Sets are currently available for 110+ models with more being added daily – so yes, there’s every chance we can supply an EP Evo Short Clutch & Brake Lever Set for your bike. A basic toolkit is all that’s required to replace the OE levers with an EP Evo Short Clutch & Brake Lever Set. Used in conjunction with the Evotech Performance downloadable video instructions, fitting is straightforward. Why don’t we see shorty levers on a standard motorcycle? Motorcycles are mass produced and must accommodate all shapes and sizes of owner, rider experience and more. So, the easy way to accommodate these variables is to produce levers that will suit all. An EP Evo Short Clutch & Brake Lever Set has inbuilt adjustment to tailor lever span for a rider’s hand size/finger reach. The fact the EP brake levers and EP clutch levers are shorter than OE is to minimise the risk of them hitting and breaking on a solid object e.g. road surface. Also, using just two fingers to apply braking force means the remainder of your fingers remain on the handlebar and, therefore, better control of the motorcycle steering system. Evotech Evo Short Clutch and Brake Lever set - MV Agusta Brutale 1000 RR (2024+) Features of EP Evo Short Clutch & Brake Lever Set Designed by Evotech Performance using state of the art design software – and riding experience Anatomically correct deep radiuséd edges along each lever length for comfort, feel and style EP EVO lever blades are shorter than the OE equivalents and commonly referred to as “two-finger levers” Usable lever width is 55mm approx. to easily accommodate two gloved fingers The “short-length” style reduces the chances of contact with a solid object and breaking Safeguard “snap point” positioned at lever ball end Six-position adjustment span to suit varying finger lengths on both levers via an anodised adjuster Lever adjustment position shown via machined indents 17mm typical (+/- 1mm) lever span adjustment range (measured at lever midpoint) Lever blade and bracket mount union machined from billet aluminium Stainless steel CNC-machined clevis pins and retaining clips and, where supplied, piston adjustment screw/barrel and tension retaining spring Scalloped machining on lever rear reduces weight while retaining strength CNC-machined bracket mount unions ensure a precise and fuss-free install of OE components Lever ball-end dimensions meet statutory requirements Durable black anodise finish on lever blades and bracket mount unions Red durable anodise finish on span adjusters Alternative colour (green, silver, blue, black, gold, orange, titanium) span adjusters available from our EP Accessories section Levers and bracket mount unions feature Evotech Performance brand logos Video fitting instructions available for download Will these fit my bike and can I fit them myself? Every EP Evo Short Clutch & Brake Lever Set is manufactured for a specific model i.e. they are not universal due to each make/model having different mountings, clutch cut-out and brake light switches etc. EP Evo Short Clutch & Brake Lever Sets are currently available for 110+ models with more being added daily – so yes, there’s every chance we can supply an EP Evo Short Clutch & Brake Lever Set for your bike. A basic toolkit is all that’s required to replace the OE levers with an EP Evo Short Clutch & Brake Lever Set. Uséd in conjunction with the Evotech Performance downloadable video instructions, fitting is straightforward. Why don’t we see shorty levers on a standard motorcycle? Motorcycles are mass produced and must accommodate all shapes and sizes of owner, rider experience and more. So, the easy way to accommodate these variables is to produce levers that will suit all. An EP Evo Short Clutch & Brake Lever Set has inbuilt adjustment to tailor lever span for a rider’s hand size/finger reach. The fact the EP brake levers and EP clutch levers are shorter than OE is to minimise the risk of them hitting and breaking on a solid object e.g. road surface. Also, using just two fingers to apply braking force means the remainder of your fingers remain on the handlebar and, therefore, better control of the motorcycle steering system. Product photography From time-to-time, we may make minor updates to our product designs in order to improve the aesthetic look, quality or performance of our accessories. For example, this could include changing the position, size or colour of the logos we print/emboss on our EP Radiator Guards. In this instance, all product photography we use on our eBay shop should always be viewed for illustration purposes only and may not be exactly representative of the product you receive when purchasing from us. This is especially the case with some of our older product ranges. We always do our utmost to ensure all product photography is as up-to-date as possible. Copyright © Drury Precision Engineering Ltd trading as Evotech Performance. All content included on this eBay shop including, but not limited to, logos, photos and text is the property of Evotech Performance and as such is protected by UK and international copyright and other intellectual property laws. Likewise, copyright and all other intellectual property rights for all parts and accessories listed on this website belong to Evotech Performance and any unauthorised copying of the product designs or reproduction may result in legal action. eBay integration by

Price: 150 GBP

Location: Alford

End Time: 2025-02-11T12:26:55.000Z

Shipping Cost: 24.39 GBP