Kenwood X302-4 eXcelon 600W Max Class D 4/3/2 HPF/LPF Channel Amplifier

Description: Kenwood's Excelon X302-4 four-channel amplifier delivers 50 watts RMS per channel, yet still fits almost anywhere in your vehicle. Switch this amp over to bridged, 2-channel mode, and you can power a pair of high-performance speakers or subs with 150 watts RMS each. In 3-channel mode, you can use the amp's front channels to drive a pair of speakers with 50 watts each, and bridge the rear channels to send 150 watts to a sub. This versatility pays off as your system evolves over time. Features - • Max Power 600W • Size (inch) (W) 8-3/8" x (H) 2-1/16" x (D) 5-7/8" • Variable High & Low Pass Filter • Bass Boost • RMS Power Output (4 Ohms): 50W x 4 • RMS Power Output (2 Ohms): 75W x 4 • Rms Power Output Bridged: 150W x 2 (Bridged) • Speak Level I Home Contact Us Mobile Marine Powersports Kenwood X302-4 eXcelon 600W Max Class D 4/3/2 HPF/LPF Channel Amplifier CONDITION: NEW BRAND: Kenwood WEIGHT: 3.5000 UPC: - Highlights - • The 4-channel amplifier is effectively two 2-channel amps (A and B) built into one chassis. Both the A and B channels are bridgeable, so it can be wired as 4-channel, 3-channel, or 2-channel. • The amplifier design is Class D, which uses digital switching power supplies. The result is the amplifier runs more efficiently, generating less heat than Class AB amps. • The amplifier has a signal-sensing turn-on circuit on the speaker level input. When a signal (up to 50 watts) is detected on the speaker level inputs, the amplifier will automatically power on. • The Input Sensitivity controls let you match the amplifier input to the preamp output level of the source unit. • The Bass Boost increases the bass signal of the B channels, centered at 40Hz. The rotary control lets you adjust the boost between 0dB and 18 dB. Description Kenwood's Excelon X302-4 four-channel amplifier delivers 50 watts RMS per channel, yet still fits almost anywhere in your vehicle. Switch this amp over to bridged, 2-channel mode, and you can power a pair of high-performance speakers or subs with 150 watts RMS each. In 3-channel mode, you can use the amp's front channels to drive a pair of speakers with 50 watts each, and bridge the rear channels to send 150 watts to a sub. This versatility pays off as your system evolves over time. Features - • Max Power 600W • Size (inch) (W) 8-3/8" x (H) 2-1/16" x (D) 5-7/8" • Variable High & Low Pass Filter • Bass Boost • RMS Power Output (4 Ohms): 50W x 4 • RMS Power Output (2 Ohms): 75W x 4 • Rms Power Output Bridged: 150W x 2 (Bridged) • Speak Level Input • Signal Sensing Turn-On Specifications - • Signal to Noise Ratio: 100dB (Reference: Rated Power into 4Ohms at 14.4V) • Frequency Response: 20Hz-50kHz (+0dB, -3dB) • Input Impedance: 10k ohm • RCA Input Sensitivity: 0.2[V] - 5.0 [V] • Speaker Level Input Sensitivity: 4.0[V] - 12.0 [V] -->

Price: 199 USD

Location: Springfield, Missouri

End Time: 2024-11-17T10:12:58.000Z

Shipping Cost: 0 USD