Description: Model: KVM-2450W Key FeaturesAutosensing NTSC, PAL, SECAM1920 x 1200 Resolution,10-Bit LCD PanelSDI, DVI, Component, Y-C, Composite178° Viewing Angle450 Nit Brightness,1000:1 Contrast RatioWaveform, Histogram, VectorscopePeaking/False Color/ZebraUnderscan/Overscan, 1 to 1 Pixel, OSDTally, Included Table Top StandVESA Mounting Screw holes What's Included: ikan Konvision KVM-2450 24" 10-Bit LCD Studio MonitorAC Power CordMonitor Stand & Mounting Screws ikan KVM-2450W SpecsSignal SystemNTSC PAL SECAMVideo Format480i 59.94 576i 50 720p 23.98/24/25/29.97/30/59.94/60 1035i 59.94/60 1080i 50/59.94/60 1080p 23.98/24/25/29.97/30/50/59.94/60LCD Size24"Resolution1920 x 1200Brightness450 nitContrast Ratio1000:1Aspect Ratio16:9 4:3Viewing AngleH: 178° V: 178°ScanFull: 100% Underscan: 95% Overscan: 105%Color Depth10-bitPixel Pitch (HxV)0.270 x 0.270 mmResponse Time5 msInput and Output ConnectorsVideo Input Combination composite/S-Video/component: 3 x BNC (Component input supports 1080p) DVI-I: 1 x DVI-I SD/HD/3G-SDI: 2 x BNC Video Output Combination composite/S-Video/component: 3 x BNC (Component input supports 1080p) SD/HD/3G-SDI: 2 x BNC Analog Audio Input 1 x 3.5mm Analog Audio Output 1 x 3.5mmSpeaker2 x 2.5 WTallyYesFront Panel ButtonsPower Button Input Select SDI1 SDI2 Video/YC YPbPr DVI/HDMI/VGA Blue/Mono Flip (SDI1 only) Zebra (SDI1 only) Focus Assist (SDI1 only) False Color (SDI1 only) Pixel Measure (SDI1 only) Aspect Ratio Marker (safety area) Audio Meter Histogram (SDI1 only) Vector (SDI1 only) Waveform (SDI1 only) PIP/PBP (SDI2 plus any other input including SDI1) SWAP/1:1 Zoom/Window select MenuRemote Control1 x RS-232 1 x RS-485 input 1 x RS-485 outputMountingVESA: 100 MIS-D/ 4 x 4" (100 x 100 mm) Included Table StandPower Connector1 x IEC 14 type inset maleInput Voltage100 to 240 VAC, 50/60 HzPower Consumption85 WDimensions14 to 122°F (-10 to 50°C)Dimensions22.8 x 15.7 x 3.1" (580 x 400 x 78.5 mm)Weight20.5 lb(9.3 kg) Packaging InfoBox Dimensions (LxWxH)27.05 x 21.1 x 10" ikan KVM-2450W Overview The ikan Konvision KVM-2450 24" 10Bit LCD Studio Monitor is a studio quality monitor that supports HD, NTSC, PAL, and SECAM. It autosenses and selects the appropriate signal format and features a 24" LCD screen. The LCD features a resolution of 1920 x 1200 pixels, 450 NIT brightness, and 1000:1 contrast ratio that delivers a sharp, bright image. It has a 178° viewing angle, so you can see a clear image even if you are off to the side. It features two SD/HD/3G-SDI inputs and one DVI-I input, which allows you to input HDMI and VGA using available adapters. The monitor also features a combination composite/component/S-Video (Y/C) input. All the inputs except the DVI input feature a loopthrough output. The KVM-2450W features built-in advanced display functions that spare you from having to set up additional signal display equipment. The built-in Waveform, Vectorscope, and Histogram displays provide you an objective look at your video signal. The monitor also features Peaking, False Color, and Zebra Bars, each one a valuable tool to check focus and exposure while shooting. The monitor scales the video to fit its screen and includes a 1:1 pixel mode for checking fine details of your image. The monitor also features an Underscan mode, so you can shrink the image within the screen to make sure you are seeing the edges of the frame. The on-screen display simplifies navigating through the menu system. The monitor supports Tally signals and includes a table stand for mounting. You can also use an available VESA mounting bracket compatible with 100mm VESA pattern.Hi Resolution LCD ScreenThe 1920 x 1200 TFT LCD screen features a 178° viewing angle up/down and left/right, high contrast, and a fast response time for a clean image. The 10-bit LCD displays over 1 billion colors. 10-Bit ProcessingThe KVM-2450W features 10-bit internal processing for a smooth clean image with minimal processing artifacts. Progressive DisplayThe default setting of the monitor displays all input signals as progressive frames. It automatically converts interlaced video to progressive video using Motion-Adaptive algorithms to minimize temporal artifacts. This affects the display image only and does not affect the pass through signal. Selecting the Fast mode in the image adjust menu disables this feature and allows interlaced images to be displayed without conversion to progressive. Color Transient ImprovementCTI detects and improves the sharpness of the edges of the chrominance signal. Input/OutputFeaturing a combination composite/component/S-Video (Y/C) input, two SD/HD/3G-SDI inputs , and one DVI input, the KVM-2450 supports HD video in NTSC, PAL, and SECAM.The monitor is autosensing and will automatically select the correct signal format from the input signal. The monitor features a combination composite/component/S-Video(Y/C/) loop through output, and two SDI loop through outputs. The loop through output is the same format as the input signal.AudioA 3.5mm headphone jack is provided on the back of the monitor. The monitor supports audio embedded in the SDI signal and includes a 3.5mm jack for audio in. An audio level meter can display the audio levels of the SDI signal. TallyThe monitor features a two color (red and green) Tally indicator. Display FeaturesThe 1920 x 1200 resolution of the KVM-2450 allows you to view HD video at a 1:1 pixel display, while using the UMD (Under Monitor Display) feature. ScopesThe Waveform provides an objective evaluation of your video signal. It displays the brightness of your image on an IRE scale, allowing you to see if your image will clip, and where your black levels are. The Vectorscope display allows you to check the phase of your colors. The Vectorscope display also allows you to verify and check the overall tint and hue of an image.HistogramThe Histogram provides a graphic depiction of how many pixels in your image are at each level between black and white. PeakingPeaking (focus assist) highlights the sharpest (most in focus) areas of the image with a color outline. False ColorThe False Color feature provides under/over luminance warning by presenting the image as a series of color values representing exposure. This allows you to easily judge the exposure values of the image and see areas of over or underexposure. Zebra BarsThe Zebra Bars appear over areas of the image with IRE levels above the customizable setting; 95% is the default level. These pulsing bars overlay the image and indicate areas of over exposure. PNP/PBPThe KVM-2450W features Picture-in-Picture and Side-by-Side display modes that allow you to display video from one of the SDI inputs and any other input on the screen at the same time, including the other SDI input. H/V DelayDisplays the blanking interval of the incoming signal. Overscan/UnderscanThe monitor features three selectable scan modes, Full Scan, Underscan, and Overscan. OSDAn on screen menu provides you access to the settings for the following: Picture: Picture Mode, Brightness, Contrast, Sharpness, Color, Hue, and Color Temp Image Adjust: Image Size, Scan Mode, DVI YUV (only for HDMI/DVI input signal), CTI, NTSC 7.5 IRE (for NTSC video only), Gray Mode, Blue Mode, Fast Mode, H/V delay (SDI signal only). OSD Settings Marker Settings Part Zoom inFormat DisplayPower SavingScreen SaverFactory Reset PIP/PBP Scope (SDI only) Waveform Vectorscope HistogramZebraPixel MeasureFalse ColorFocus AssistH Flip
Price: 999.99 USD
Location: Houston, Texas
End Time: 2024-08-09T18:14:17.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 14 Days
Refund will be given as: Money Back
Screen Size: 24 in
Video Format: HD, SD
Screen Brightness: 450
Dimensions: 22.8 x 15.7 x 3.1"
MPN: KVM-2450W
Number of Outputs: 4
California Prop 65 Warning: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
Brand: Konvision
Image Control: False Color, Focus Peaking, Histogram, Vectorscope, Waveform
Type: Video Monitor
Output Interfaces: SDI, Component, Y-C, Composite
Display Type: LCD
Number of Inputs: 5
Model: KVM-2450W
Compatible Mount: Vesa
Input Interfaces: SDI, DVI, Component, Y-C, Composite
Connectivity: DVI, BNC
Features: 1920 x 1200 Resolution,10-Bit LCD Panel, 450 Nit Brightness,1000:1 Contrast Ratio, Autosensing NTSC, PAL, SECAM, SDI, DVI, Component, Y-C, Composite, VESA Mounting Screw holes
Country/Region of Manufacture: China
Item Weight: 20.5 Lbs
