Description: Give your prints a fun 3D look with puff vinyl! This material is super easy to use and only requires one press. It is easy to weed & its pressure sensitivity allows for quick and painless repositioning. Colors GPI offers: White, black, red, royal blue, yellow, neon green, neon pink. Blade – 45° with low pressure TemperatureWhite: 290° FPink & Neons: 275° F Time10 Seconds PeelHot peel. Remove carrier / transfer sheet immediatelyPressureMedium/firm even pressureCut/PrintCut mirror image MaterialsCotton, uncoated polyester, fabric blends, polyester/acrylic, & similar fabrics. NO NYLONCareWash inside out, cold water, gentle cycle. Tumble dry low Additional Instructions Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials: Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment. We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment. Cut Settings for Graphtec CE6000: Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended. 1. Offset: 0 2. Speed: 25 cm/s 3. Acceleration: 4 4. Cut Force: 16 *HTW uses a 45 Degree Blade Cut Settings for Silhouette Cameo: Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended. Material: Heat Transfer, Smooth Blade: 3 Speed: 8 Force: 6 Cut Settings for Cricut®: Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended. Set Material: Iron-On Pressure: Default Blade: Fine-Point Blade (Standard)
Price: 64 USD
Location: Hauppauge, New York
End Time: 2025-01-20T18:52:31.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: ThermoFlex
Personalize: No
Type: Vinyl
Transfer Style: HTV
