RetroGamingCables Packapunch 480p RGB SCART Cable for Sega Dreamcast

Description: This is a Sega Dreamcast SCART cable which can be swapped between 15KHz/576i and 31KHz/480p modes. Used once, in very nice condition. It is this one: https://www.retrogamingcables.co.uk/sega/SEGA-DREAMCAST-RGB-SCART-CABLES/SEGA-DREAMCAST-RGB-SCART-CABLE-WITH-480P-MODE To be clear this is their original Dreamcast SCART cable, not the "powered by RetroTINK" version. From the Manufacturer: An all in one cable solution for playing Dreamcast games in 480p mode via RGB SCART. This incorporates a circuit which converts the VGA outputted by the Dreamcast to a combined sync to achieve a 31KHz progressive scan mode for use on SCART equipment which accepts 31KHz/480p like the OSSC and Framemeister for example. It also has a selector switch for switching between interlaced and progressive scan mode or 15KHz/576i and 31KHz/480p, so you can still use this cable on a SCART TV but in 15KHz/576i mode only. This cable supplies an RGB video signal and stereo sound from your Sega Dreamcast (PAL/NTSC) which is far superior than the original video cable. This cable is screened to minimise external interference and cable crosstalk between signals. This is achieved by using our new PACKAPUNCH cable which has individually shielded wires for RED, GREEN, BLUE, SYNC, audio left and right and also the DC voltage line which is used for RGB selection on your video receiving equipment. Features:No Tuning required, just plug and play.True RGB video & stereo sound.Constructed from custom screened PACKAPUNCH PRO cable especially made for Retro Gaming Cables and is available in various lengths.Fully wired/ grounded SCART plug using a custom PCB.Custom transparent MultiAV plug and integrated sync combining circuit to achieve 480p (31 KHz VGA). Also has a switch so you can toggle between 15KHz/576i mode for use on normal SCART televisions and 31KHz/480p mode for use on equipment that can process 31KHz like the Open Source Scan Converter (OSSC), Micomsoft XRGB Mini Framemeister, etc. Normal SCART televisions will not work in 31KHz/480p mode, however, you can just select 15KHz/576i mode using the built in switch.Attenuated and AC coupled RGB and CSYNC signals using 220uF capacitors and 10 Ohm resistors on the RGB lines and a 220uF capacitor and 470 ohm resistor on the CSYNC line. Compatible with:SCART enabled televisions, but only in 15KHz/576i mode only.SCART to HDMI converters that support RGB video. Some don't, so please read this.SCART to component video converters.XRGB-mini Framemeister via EuroSCART to mini adapter.OSSC (Open Source Scan Converter).RetroTink 2X SCART, RT5X & RT4K.

Price: 49.99 USD

Location: La Fayette, New York

End Time: 2024-11-30T11:39:03.000Z

Shipping Cost: N/A USD