Description: Guaranteed Good GPS Sync • Correct Date Displayed • Brand New Furuno GPS Receiver Installed • Fully Working • IRIG-B, 10MHz and 1PPS Inputs/Outputs • Firmware v1.36 • IPv6 Ready • TCXO Photos show the actual item for sale Description Note: This unit has been upgraded with a brand new GPS receiver module from Furuno in Japan. It is therefore unaffected by the September 18th 2022 week number rollover event that caused most SyncServers to fail to sync to GPS and eventually to show an incorrect date. The new card is good for accurate GPS time and date reception until 2037. Here's a used late model Symmetricom/Microsemi SyncServer S250 NTP server that obtains highly accurate and traceable time from the GPS satellite constellation - as well as IRIG-B, 10MHz and 1PPS inputs if preferred. The OEM GPS receiver in this unit has been replaced with an updated module for solid service for many years to come. The unit has been tested (results in screenshots below) and confirmed to work fully. The cosmetic condition is good - the photos show the actual item for sale. A few nicks and scratches in the paintwork have been retouched with matching paint so the unit will look smart when installed in your rack. The VFD display while showing some age is still is clear and legible. No antenna is included but I have the matched 12V AT575 antenna available in a separate listing, and/or can edit the listing to include one if required. Note that the antenna voltage is 12V so you cannot use one of the generic 5V antennas commonly offered for sale. The antenna needs to be mounted outside with a complete view of the sky. It ships set to the factory logon defaults (admin:symmetricom) ready for your install. This unit has the TCXO internal oscillator. The installed firmware is v1.36 which is the latest version available at the time of listing. Listing comprises the items you see in the images only. Full details may be obtained from the Datasheet and User Manual https://www.prostudioconnection.net/1404/SyncServer_S250_User_Guide.pdf Usually Sells for $5,353 Description The SyncServer S250 provides multiple and versatile timing configurations that support the expanding technological requirements of large enterprises. It is Next Generation ready to be the synchronization source for multiple applications Multiple and Versatile Timing Configurations The Stratum 1 S250 will automatically synchronize to GPS, IRIG B AM, 1PPS, and 10 MHz in that priority. It smoothly transitions from one reference to the next available if the higher priority signal is lost or regained. This is perfect for operating with different backup time or frequency sources. The S250 can also revert to a Stratum 2 mode and retrieve time from other user-designated time servers. Easy To Set Up and Maintain SyncServers are the easiest to set up and maintain network time servers in the world. The front panel of the SyncServer S250 is designed to quickly bring the server online with a few front panel keystrokes or DHCP. To fully configure the unit, use the very intuitive web interface or the step-by-step wizards for the most common operations. Highly Robust and Secure The S250 provides reliable and secure network synchronization technology by combining multi-port, high-speed/ high-capacity network interfaces and versatile GPS timing receiver technology. Flexibility and Performance The multiple ports of the S250 provide the flexibility to adapt to different network topologies as networks grow and change. It supports a wide range of network protocols including IPv4 and IPv6, for easy management and seamless integration into your existing and future network. The high speed processor and a nanosecond clock assure high bandwidth NTP performance for hundreds of thousands of network clients. Assured Perfect Timing The Stratum 1 level S250 derives extremely accurate time directly from the atomic clocks aboard the GPS satellite system. Reliability is further enhanced via Stratum 2 operation by retrieving time from other user-designated time servers. All SyncServers can be upgraded to an internal Rubidium atomic oscillator to keep the time server accurate if the GPS signal is lost. Customer Tested Time Server Design The 5th generation Symmetricom SyncServer S250 has decades of design experience behind it. Customer input is evident in every detail. From the front and rear panel design configurations to the state-of-the art web interface, the S250 is unsurpassed in reliability, accuracy, security and ease of use. Bottom Line The SyncServer S250 is the perfect solution to bringing ultra precise time and frequency to network and instrumentation synchronization with the added benefit ease-of-use and state-of-the-art networking technology. Features Next generation, High-Bandwidth NTP Time Server Stratum 1 Operation Via GPS Satellites 3 Independent 10/100Base-T Ports High-Resolution Vacuum Florescent Display Full numeric keypad IPv6 and IPv4 Compatible Secure Web-Based Management SSH, SSL, SCP, SNMP v3, Custom MIB, HTTPS, Telnet, FTP, and more Stratum 2 Operation via NTP Servers Nanosecond time accuracy to UTC IRIG B AM, 1PPS, 10 MHz input/output Dedicated Sysplex Timer output Email Alerts for Alarms or Error Single Satellite Timing Dual USB ports All features of the SyncServer S200
Price: 641.55 USD
Location: Winter Garden, Florida
End Time: 2024-08-11T16:19:12.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: Symmetricom
Number of WAN Ports: 3
Form Factor: Rack Mountable
Type: Server
Processor Manufacturer: Microsemi
Network Connectivity: Wired-Ethernet (RJ-45)
Network Management Type: GPS
Model: S250
MPN: 1520R-S250
Processor Type: TCXO
Interface: Ethernet (RJ-45)
Product Line: SyncServer