Description: Wall Control Remote Button Garage Door Opener For Craftsman WIRED CONTROL PANEL INSTALLATION INSTRUCTIONS FOR USE WITH GARAGE DOOR OPENERS MANUFACTURED AFTER JANUARY 1,1995. To ensure proper function of your opener, remove all old or previous push buttons/wall control panels. Use only the enclosed door control for proper operation. Specification: item color: Blacktype: Wall Buttonmaterial: Plastic/ABSsize: 4.9*3*0.7in Fit Learn Button: Purple, Orange, Red, Green. Fit For: Chamberlain, Sears, Master Mechanic, Garage Master, Wayne-Dalton and Raynor.For 78LM 79LM 81LM 371LM 971LMPackage Included: 1 x Multi-Function Wall Console Features: Indoor wall-mounted door controller, compatible with Security + systems. Replaces standard door control buttons.Conveniently installed in the garage through your access door,Open the garage door at the touch of a button.Includes an oversized illuminated push button.Turn on and off opener lights to provide additional lighting for garage work.Features that lock all external radio signals for added security.All Security+ systems for LiftMaster (code rotation).Also compatible with Chamberlain, Sears, Master Mechanic, Garage Master, Wayne-Dalton and Raynor.For 78LM 79LM 81LM 371LM 971LM Lock Feature: To activate: Press and hold the Lock button for 2 seconds. The push button indicator light will flash as long as the lock is on.To turn off: Press and hold the Lock button again for 2 seconds. The indicator light will stop flashing. Normal operation will resume.The Lock feature will also turn off whenever the Learn button on the opener end panel is activated. Installation 1. Disconnect power to the garage door opener. 2. Strip ¼” (6 mm) of insulation from each end of wire. Pass the wires through ④ places. 3. Use screws to fix the back cover on the wall nails. Fixed①,②,③ places. (Do Not overtighten, you may damage the plastic housing.)4. The wires passing through hole 4 are connected to the two screw terminals on the Circuit board as shown below: Red/white wire to 1 and white wire to 2 WOTE: After installation, the indicator light behind the push button cover will indicate proper connection. 5. Run bell wire up wall and across ceiling to motor unit. Use insulated staples to secure wire to wall and ceiling in several places. Do NOT pierce wire wit h a staple, this will create a short or open circuit. 6. Strip 7/16" 11 mm of insulation from the end of the bell wire 7. Connect bell wire to terminals as follows： Quick Connect Term Screw Terminals: Red/white to 1 and white 2(Figure 2). 8. Buckle the circuit board to the back cover. 9. Reconnect power to the garage door opener. Fast Shipping in the USA
Price: 12.5 USD
Location: Roanoke, Texas
End Time: 2025-01-19T17:46:08.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Compatible Brand: For Chamberlain, For Raynor, For Wayne Dalton, For Master Mechanic, For Garage Master
Battery Technology: Lithium-Ion
Power Source: Corded
Operating Range: 100 ft
Battery Included: No
Bundle Description: Garage Door Opener Wall Remote
Items Included: Batteries
Color: Black
Compatible Model: For 78LM, For 79LM, For 81LM, For 371LM, For 971LM
MPN: Does Not Apply
Material: Plastic
Fit Learn Button: Red, Orange, Purple, Green,
Item Depth: 0.7IN
Number of Buttons: 2
Brand: D.S ®
Type: Wall Button
Unit Type: ft
Item Height: 4.9 in
Model: Garage Remote Wall
Style: Lightweight Portable
Features: Illuminated Buttons, Illuminated Display, Universal, Water Resistant
Unit Quantity: 1/2 PC Wall Remote
Item Width: 3 in
